One of my friends at Pixel-Mesh took a few household tools and the leftover pizza box from his lunch and fashioned it into a homemade flash snoot that yielded surprisingly good results. A snoot restricts the light and allows you to direct it at a specific location, helping you to eliminate “light spill”
A razor knife, builders square and a roll of dark colored duct tape (you knew duct tape was going to make an appearance somewhere).
Using The Top of The Box
Cut the outline of the snoot shape and cover the cardboard with a layer of duct tape.
Fold Into the Proper Shape
Fold into the proper shape and tape it into position.
Attach to The Flash
If you sized it right it will fit on the flash without taping it.
With the flash attached to a Canon 5D MKII the results are not bad, not bad at all.
Owners of some models of Canon point-and-shoot cameras have some interesting features that can be added to their cameras with the help of CHDK firmware hacks.
CHDK stands for Canon Hack Developer Kit and can add features like RAW file output, motion detection that’s fast enough to catch lightning in a bottle, automatic bracketing, full manual control, zebra mode, a live histogram, and crazy high flash sync speeds.
The changes are temporary and can be reset just by switching data cards and resetting the camera. All the same the software is free and experimental, you’re responsible if something goes wrong.
Even better CHDK is being actively developed, so you’ll have new features being added all the time.
If your camera is on the support camera list in the FAQ all you need is a spare SD card and you’re right in business.
CHDK does not replace your camera’s native firmware, it loads as an add-on program that extends the firmware’s capability in lots of interesting ways.
For DSLR users of the Canon 5D MK II, 550D, 60D, 50D, and 600D, you also have some nifty firmware hacks you can play with over at Magic Lantern. Initially developed for video users it has since been expanded to find some of the features found in CHDK.
There’s some debate about whether using CHDK or Magic Lantern voids your warranty so it’s worth some research before deciding whether to try it. Messing with the firmware is never completely risk free, even if you’re upgrading the factory firmware.
Still there is no firmware fun for Canon 7D users. Magic Lantern has finally got the blank firmware to read properly, but no time frame on further developments.
If you have one of the compatible cameras, read the installation instructions carefully and go have fun.
If you’ve ever been in a professional studio you were likely blown away by the sheer volume of lighting equipment and were maybe a bit depressed when you thought about what it all must have cost. And my friends in the video business are even more annoying with their envy-inducing rigs like Skylight Balloon Lights. I fell like The Joker in the Batman movie asking where they get all those marvelous toys. Still, even with the collection of lighting equipment available, I’ll still turn to low-cost lighting hacks in a pinch and there are one or two I use regularly because I don’t need the expensive rigs enough to justify the cost.
Milk Jug Diffuser
One that’s been around a while that doesn’t miss is the Milk Jug Diffuser, also called the Milk Jug Ring Light.All you need is a gallon plastic milk jug and a pair of scissors or razor knife. Cut out one side of a milk jug, and at the narrower end cut a hole the just slightly smaller than your lens filter.Fit it on the end of your lens and the milk jug should stick up high enough to act as a diffuser for your on camera flash. It looks funky, but works. I’ve also taken a shorter piece of milk jug material and taped it over the end of my hand-held flash with gaffer tape.
I’ve used Chinese lanterns in both video and still photography shoots and they make a really interesting diffuser. They’re big enough inside to work if you need to put foil on one side, and you can point your flash up, down or away from the subject and get a different effect. They’re very light, easy to move around, you can even hang them from the ceiling and hang the flash unit from the metal frame inside.
They come in a variety of shapes, colors and rib designs. Even the big ones are fairly inexpensive. If it gets wrecked on set, no one is going to lose sleep over it.
Do keep in mind they are not fire proof, so don’t go putting halogens or hot lights inside.
Another great feature of Chinese lanterns are they come with an internal wire support you can gaffer tape to the light stand.
So, you can spend $600 on an Octobank or $2 on a paper lantern, get a very similar effect and be able to run it up as high as your light stands will go. I don’t have my soft banks anymore, but still carry my paper lanterns around.
The $35 Beauty Dish
With a Fong diffuser, an aluminum foil turkey pan and some gaffer tape you can make a beauty dish.
Cut a hole in the middle of the turkey pan and fit the diffuser through it, tape if necessary to hold it in place. Foil or gaffer tape over the end of the diffuser and blaze away. Results are surprisingly good.
Complete DIY instructions here. For as often as I really need a beauty dish, I’ll risk looking a little low rent.
Craig Brewer made his first full-length movie called Hustle & Flow with nothing but shop lights and a handful of photo bulbs. Anytime we get separated at the hardware store, my wife knows right where to find me. I’ll be in the section with the shop lights.
I’ve used halogen shop lights on photo shoots and video sets as both primary lighting and for lighting background elements. I carry a set in the truck anytime I’m headed out for a shoot.
Sometimes the temperature is off, but nothing I haven’t been able to correct with $20 worth of gel filters from Adorama and a handful of clothespins.
The new LED shop lights are the right temperature and don’t out nearly as much heat. Perfect for when you need a shadow fill or colored gel for a background effect.
The Foamcore Strip Light
I think everyone has seen this one before, but it’s worth repeating. A little harder to put together because you need a glue gun and a space to work, but it really makes a nice strip light. Almost as good as any of the commercial units I’ve used. If you take your time and put them together neatly, a lot of people won’t even notice you made them yourself!